Input Module/Strain Gauge/1AI/1AO/1VO/isol./600HzThe SG-3016 is a voltage input to voltage or current output signal conditioning module. It has 1000 Vdc three-way isolation for input, output and power. It also can change the input/output range via internal configuration switches. The SG-3016 has an LED display to show whether the SG-3016 is functioning correctly and has three VRs (Zero, Span, Exci) to calibrate accuracy of the input/output range . The bandwidth of the SG-3016 is typically 600 Hz. It is easy to mount the SG-3016 on a standard DIN rail and operate in environments with wide temperature range.
IoT E-Ink DisplayDS3604 is a reflective electrophoretic display offering readability
and flexibility. The 4.2-inch active area contains 400 x 300 pixels
and has 1-bit Black/White/Red full display capabilities. DS3604
supports displaying up to 150 languages and other modules like
picture or QR code. Long-capacity batteries and ultra-low power
consumption bring a long battery life of up to 5 years.
DS3604 enables quickly modifying the displayed content
remotely and locally through simple operations and allows
remote management in bulk. Moreover, DS3604 can be installed
in multiple methods and be compliant with standard LoRaWAN®
gateways and networks for more integrated applications.
Encoder Counter/3-axis/RS-485/32bits/Battery/LEDThe I-7083 and I-7083B are 3-axis high speed encoder modules. Each axis on the module can be independently confi gured as one of Quadrant, Pulse/Dir or CW/CCW input mode with a maximum input rate of 1 MHz. The high-end specifications of the I-7083/I-7083B and complete software support make it ideal for a wide range of applications in position measurement of motion systems working in industrial and laboratory environments. The I-7083B is an improved version of I-7083 with virtual battery backup function for counter value.
Daughter Board/PISO-PS400/Delta ASDAThe DN-8468 series is a daughter-board that is designed for ICP DAS’s 4-axis motion controllers, such as I-8094, I-8094F, I-8094A, I-8094H and PISO-PS400. And they are for different motor drivers, such as general purpose usage, Mitsubishi and Panasonic motor amplifier. It is a not only a screw terminal board for easy connection of signals; it also provides onboard isolating circuitry to protect the controllers. Interface signals are divided into four groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, special purpose inputs (Home, near home, limit-switches) and a servo-enable output. Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains onboard power module which provides different voltages for other onboard circuitry. And this power module accepts wide range input power (20 ~ 26 VDC).
Encoder Input Board for PISO-EncoderThe DN-68 is an I/O terminal board with DIN-rail mounting provides pin to pin screw terminal I/O connection of 68-pin SCSI-II connector for easy field wiring.
Stepper/Servo Module/4 axisThe I-8094 and I-9094 are 4-axis stepping/pulse-type servo motor control modules that can be used on the programmable automation controller (PAC) series provided by ICP DAS, and are suitable for general-purpose motion applications. In addition to their wide speed range, these intelligent motion controllers also have a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/ deceleration, a range of synchronous actions, automatic homing, and others. A major advantage is that the majority of the I-8094/I-9094 motion control functions are performed by the high-performance motion ASIC with little load on the processor. While driving the motors, the motion status, and the status of other I/O channels on the PAC modules, can still be monitored. As the CPU loading requirements of the I-8094/I-9094 is minimal, one or more motion modules may be used with a single PAC controller. ICP DAS also provides a wide range of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-eff ective solution for motion control application developers. Features
Daughter Board/Photo-isolatedThe DN-8368 series is a daughter-board that is designed for ICP DAS’s 6-axis motion controllers, such as PISO-PS600, PISO-VS600 and PMDK. Each DN-8368xB supports 3-axis and two DN-8368xB are required to support 6-axis. The DN-8368GB is designed for general purpose usage while the DN-8368MB is designed to be easily connected with Mitsubishi MINAS-J2S series servo amplifier. It is not only a screw terminal board for easy connection of signals; it also provides on-board isolating circuitry to protect the controllers. Interface signals are divided into three groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, mechanical switch inputs (Home, near home, limit -switches) and some servo input/output interfaces (Srv_On, ERC, ALM_RST, RDY, Alarm, INP). Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains on-board power module which provides different voltages for other on-board circuitry.