Screw Terminal Board/CA-3720/DINFemale DB37 to Screw Terminal Board with DIN-rail Mounting for PCI-1202U/1602U/1802U/822/826Include: CA-3720 (DB37 Male to Male, 45º, 2M)
Daughter Board/Relay/24RO/12V/CA-5015/DINThe DB-24PR/DB-24PRD is a 24-channel power relay output board which consists of 8 Form C and 16 Form A electromechanical relays for efficient load switching. The contact rating of each relay is 5 A at 250 VAC or 5 A at 30 VDC. These relays can be switched to ON by applying a 5 V signal from an I/O Card in the PC to the appropriate relay channels. The DB-24PR/DB-24PRD daughter board contains a single 50-pin OPTO-22 compatible connector, and a single 37-pin D-sub connector or a single 20-pin flat cable connector. The 24 onboard LEDs indicate the output status of the relays, illuminating when their associated relay is activated. To avoid overloading your PC’s power supply, this board requires either a +12 VDC or a +24 VDC external power supply.
MPG/FRnet Input Board/PISO-PS600/DINThe DN-20M is a daughter-board that is designed for ICP DAS’s 6-axis motion controllers, such as PISO-PS600, PISO-VS600, I-8196F, I-9196F and PMDK. It is designed to be easily connected with a full function manual pulse generator. It is not only a screw terminal board for easy connection of signals; it also provides on-board isolating circuitry to protect the controllers. A RJ-45 connector is also adopted for FRnet connection.
Daughter Board/16DI/Bi-direction/The DB-16P is a 16 channel isolated digital input daughter board forA-82X board or any 812pg,711 726 , 720 series board, and PCI-Bus Multi-function board. The optically isolated inputs of the DB-16P consists of a bi-directional OPTO-coupler with a resistor for current sensing. You can use the DB-16P to sense DC signal from TTL levels up to 24V. You can also use DB-16P to sense a wide range of AC signals. You can use the board to isolated the computer from large common-mode voltages, ground loops and voltage spikes that often occur in industrial environments.
Relay Board/16RO/20pinThe DB-16R 16 channel Relay Output Board consists of 16 form c relays for efficient switch of load by programmed control. It is connector and functionally compatible with 785 series board but with industrial type terminal block. The DB-16R can be used by A-82x board or any other compatible board The relay are energized by apply 5 volt signal to the appropriate relay channel on the 20-pin flat cable connector . Sixteen enunciator LEDs ,one for each relay , light when their associated relay is activated . To avoid overloading your PC’s power supply ,this board provides a screw terminal for power supply.
€124.00*
Easy ordering via online shop
Directly from manufacturer
Europe-wide shipping
personal consultation
Request sent successfully
Request wasn't send - a error occured. Please try again.