ICPDAS-EUROPE GmbH/Products/DAQ Card/PCI/Digital products

PIO-D96U CR 0,00 €

Fri, 18 Oct 2019 13:31:16 +0200

The PEX-D96S card is a new generation product provided by ICP DAS to meet RoHS compliance requirements.

The PIO-D96U/D96SU supports 3.3 V/5 V PCI bus, while the PEX-D96S supports PCI Express bus. These cards provide 96 TTL Digital I/O lines that consist of twelve 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs ports on power-up or after a reset.

The PIO-D96U provides four connectors for I/O wiring, while the PIO-D96SU and PEX-D96S provides a single high-density connector that reduces the amount of installation space required for the card in the computer.

The PIO-D96U/D96SU and PEX-D96S cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.

These cards support various OS such as Linux, DOS, Windows 98, Windows NT, Windows 2000, 32-/64-bit Windows XP/2003/2008/Vista/7 and Windows 8. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.

PIO-D144U CR 0,00 €

Fri, 18 Oct 2019 13:31:12 +0200

The PEX-D144LS card is the new generation product that ICP DAS provides to meet RoHS compliance requirement.

The PIO-D144U/D144LU universal PCI card supports 3.3 V/5 V PCI bus, while the PEX-D144LS supports PCI Express bus. These cards provide 144 TTL digital I/O lines that are grouped into eighteen 8-bit bi-directional ports. Each group of three 8-bit ports is arranged on the connector as Port A (PA), Port B (PB) and Port C (PC), respectively, and all ports are configured as inputs Ports on power-up or after a reset.

The PIO-D144U/D144LU provides six connectors for I/O wiring, while the PEX-D144LS provides a high-density connector that reduces the amount of installation space required for the card in the computer.

The PIO-D144U/D144LU and PEX-D144LS cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The PIO-D144LU and PEX-D144LS also adds pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.

These cards support various OS such as Linux, DOS, Windows 98, Windows NT, Windows 2000, 32-/64-bit Windows XP/2003/2008/Vista/7 and Windows 8. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.

PCI-FC16U CR 0,00 €

Fri, 18 Oct 2019 13:30:31 +0200

The PCI-FC16U is a 32-bit hardware-type high-speed Counter/Frequency board that supports both the 3.3 V and the 5 V Universal PCI bus. The card provides 16 channels that can be individually configured for either frequency measurement or up-counter applications, and can support high-frequency signals up to 250 kHz. The PCI-FC16U board also includes 32 programmable Digital I/O channels.

The PCI-FC16U board includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more boards are installed in the same computer. The pull-high/pull-low resistors allow the DI status to be predefined as either high or low instead of remaining floating if the DI channels are disconnected or interrupted.

The PCI-FC16U board supports a variety of operating systems, such as DOS, 32-/64-bit Windows XP/2003/2008/7 and Windows 8. ICP DAS also provides a DLL and Active X control for the PCI-FC16U, together with sample programs in various languages, including Turbo C++, Borland C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW, enabling help users to quickly and easily develop their custom applications.

PISO-P32C32U CR 0,00 €

Fri, 18 Oct 2019 13:31:20 +0200

The PEX-P32C32 and PISO-P32C32U series card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new P PEX-P32C32 and PISO-P32C32U series card is designed as a drop-in replacement for the PISO-P32C32, and users can replace the PISO-P32C32 by the PEX-P32C32 and PISO-P32C32U directly without software/driver modification.

The PISO-P32C32U/P32C32-5V universal PCI card supports 3.3 V/5 V PCI bus while the PEX-P32C32 supports PCI Express bus. These cards provide 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks. Each input channel uses a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a Darlington transistor. The power supply of the input port may use the external power or the power from the PC side via DC/DC converter. The power supply of the output port should use the external power. The board eliminates ground-loop problems and isolates the host computer from damaging voltages.

The PEX-P32C32 and PISO-P32C32U/P32C32U-5V also adds a Card ID switch. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PEX-P32C32 and PIO-P32C32U/P32C32U-5V cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 8/7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications

PCI-D96SU CR 252,28 €

Fri, 18 Oct 2019 13:30:06 +0200

The PCI-D96SU/D128SU card is a new generation product provided by ICP DAS to meet RoHS compliance requirements.

The PCI-D96SU/D128SU supports 3.3 V/5 V PCI bus. These cards provide 96/128 Digital I/O lines that consist of three/four 32-bit bi-directional ports for use in a variety of Digital I/O applications. Each channel could be setting for Digital Input or Output. They provide a variety of operating voltage (+1.8 V, +2.5 V, +3.3 V and +5 V) for customers need.

The PCI-D96SU/D128SU cards include an onboard Card ID switch that enables the board to be recognized via software if two or more boards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted. The PCI-D96SU/D128SU provides a single high-density connector that reduces the amount of installation space required for the card in the computer.

These cards support various OS versions, such as DOS and 32/64-bit Windows 10/8/7/2008/2003/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PIO-D24U CR 0,00 €

Fri, 18 Oct 2019 13:31:21 +0200

The PIO-D24U/D56U and PEX-D56/D24 cards are the new generation product that ICP DAS provides to meet RoHS compliance requirement and is designed as completely compatible with the PIO-D24/D56. Users can replace the PIO-D24/D56 by the PIO-D24U/D56U and PEX-D24/D56 directly without software/driver modification.

The PIO-D24U/D56U supports 3.3 V/5 V PCI bus, while the PEX-D24/D56 supports PCI Express bus. The PIO-D24U/D56U and PEX-D24/D56 consists of three 8-bit bi-direction ports. The 8-bit ports are named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset. In addition, the PIO-D56/D56U provides additional 16-bit digital inputs and 16-bit digital outputs.

The PIO-D24U/D56U and PEX-D24/D56 has a Card ID switch with which users can recognize the board by the ID via software when using two or more PIO-D24U/56U and PEX-D24/D56 cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 7/Vista/XP. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

PIO-D64U CR 0,00 €

Fri, 18 Oct 2019 13:31:20 +0200

The PIO-D64U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PIO-D64U card is designed as a drop-in replacement for the PIO-D64, and users can replace the PIO-D64 by the PIO-D64U directly without software/driver modification.

The PIO-D64U universal PCI card supports 3.3 V/5 V PCI bus while the PIO-D64 supports 5 V PCI bus. These cards provide 32-ch digital input and 32-ch digital output that consist of two 16-bit input ports and two 16-bit output ports. The PIO-D64U and PIO-D64 also offer 6-ch counter/timer with four-clock sources, 2 MHz, 1 MHz, 500 kHz and 250 kHz. The user can use the clock source from the soldering pad. 3 of the 6-ch timer/ counter are for general purposes such as frequency measurement, event counting and pulse generation; the other 3 channels are for interrupt function.

The PIO-D64U has a Card ID switch with which users can recognize the board by the ID via software when using two or more PIO-D64U cards in one computer.

The PIO-D64/D64U supports various OS such as Linux, DOS, Windows 98/NT/2000 and Windows 32-bit Windows XP/2003/Vista/7. It also provides the DLL and Active X control, and various language sample program in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.

PISO-725 CR 0,00 €

Fri, 18 Oct 2019 13:31:20 +0200

The PISO-725 is a 16-channel digital input/output interface board for PCI bus computers. It can be installed in a 5 V PCI slot and supports true "Plug & Play" to automatically obtain I/O resources. The PISO-725 has a single DB-37 connector, and provides 8 electromechanical relay outputs and 8 isolated/non-isolated digital inputs. The digital inputs can be set to either isolated or non-isolated via a hardware jumper. Each of the digital inputs will generate an interrupt signal if the state is changed, which is very useful when monitoring for contact closures/openings as it is not necessary to continuously poll the inputs. The isolated DI channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DI channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. All relays are de-energized (off) while powering-on, and support On/Off status read back. The PISO-725 can be used in various applications, including contact closure, external voltage sensing, load sensing and I/O control.

The PISO-725 supports various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PISO-P8R8U CR 0,00 €

Fri, 18 Oct 2019 13:30:56 +0200

The PISO-P8R8U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PISO-P8R8U card is designed as a drop-in replacement for the PISO-P8R8, and users can replace the PISO-P8R8 by the PISO-P8R8U directly without software/driver modification.

The PISO-P8R8U universal PCI card supports 3.3 V/5 V PCI bus while the PISO-P8R8 supports 5 V PCI bus. These cards provide 8-channel optically isolated DI and an 8-channel electromechanical relay output board. These DI channels provide 3750 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Relays are used where necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled using one signal. The PISO-P8R8/P8R8U can be used in varous applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc. These cards contain a single DB-37 connector for easy wiring.

The PISO-P8R8U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PIO-P8R8U cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 10/8/7/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PISO-P32A32U CR 0,00 €

Fri, 18 Oct 2019 13:31:05 +0200

The PEX-P32A32 is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PEX-P32A32 is designed as an easy replacement for the PISO-P32A32U without requiring any modification to the software or the driver.

The PISO-P32A32U/P32A32U-5V universal PCI card supports 3.3 V/5 V PCI bus while the PEX-P32A32 supports PCI Express bus. These cards provide 32 optically-isolated Digital Input channels and 32 optically-isolated Digital Output channels, arranged into four isolated banks. Each Digital Output channel includes a PNP transistor and an integral suppression diode for the inductive load. Isolated input channels 0-15 are allocated to Group A, while channels 16-31 are allocated to Group B. Isolated output channels are allocated to Groups C and D. The photocoupler input for the PISO-P32A32U-5V can be powered by either an internal current source or an external power supply, while the input for the PEX-P32A32/PISO-P32A32U operates using an external power supply only.

This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The PISO-P32A32U/P32A32U-5V has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat-cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

The PEX-P32A32 and PISO-P32A32U/P32A32U-5V also include an onboard Card ID switch that enables the board to be recognized via software if two or more boards in the same computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 8/7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PCI-P16C16U CR 0,00 €

Fri, 18 Oct 2019 13:30:36 +0200

The PCI-P16C16U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement and is designed as completely compatible with the PCI-P16C16U. Users can replace the PCI-P16C16 by the PCI-P16C16U directly without software/driver modification.

The PCI-P16C16U universal PCI card supports 3.3 V/5 V PCI bus. These cards contain 16 optically isolated Digital Input channels and 16 open collector (Sink, NPN) Digital Output channels. The DI channels provide 5000 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. The open collector output (DO) channels are typically used for alarm and warning notification, control of signal output, control of external circuits that require a higher voltage level, and signal transmission applications, etc.

The PCI-P16C16U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.

The PCI-P16C16U supports various OS versions, such as Linux, DOS, 32/64-bit Windows 8/7/2008/2003/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PISO-730AU CR 254,66 €

Fri, 18 Oct 2019 13:30:10 +0200

The PEX-730A and PISO-730AU/730AU-5V card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The PISO-730AU card is designed as a drop-in replacement for the PISO-730A, while the PEX-730A card is designed as easy replacement for the PISO-730A. Users can replace the PISO-730A by the PEX-730A and PISO-730AU directly without software/driver modification.

PEX-730A, PISO-730A and PISO-730AU(-5V) cards provide 32 isolated Digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level Dgital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltage spikes. Each Digital Output includes a PNP transistor and integral suppression diode for the inductive load. The open-collector Digital Output channels are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PEX-730A and PISO-730AU(-5V) cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

These cards support various OS versions, such as Linux, DOS and 32/64-bit Windows 10/8/7/2008/2003/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PCI-P8R8U CR 0,00 €

Fri, 18 Oct 2019 13:30:39 +0200

The PCI-P8R8U/P16R16U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement and is designed as completely compatible with the PCI-P8R8/P16R16. Users can replace the PCI-P8R8/P16R16 by the PCI-P8R8U/P16R16U directly without software/driver modification.

The PCI-P8R8U/P16R16U universal PCI card supports 3.3 V/5 V PCI bus while the PCI-P8R8 supports 5 V PCI bus. These cards contain 8/16 photo-coupler Digital Input channels that provide 5000 Vrms isolation protection, allowing the input signals to be completely floated so as to prevent ground loops. They are also equipped with 8/16 Relay Output channels that can be used to control the ON/OFF state of external devices, drive external relays or small power switches, or activate alarms, etc.

The PCI-P8R8U/P16R16U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 10/8/7/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PIO-D168U CR 0,00 €

Fri, 18 Oct 2019 13:31:05 +0200

The PIO-D168U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PIO-D168U card is designed as a drop-in replacement for the PIO-D168, and users can replace the PIO-D168 by the PIO-D168U directly without software/driver modification.

The PIO-D168U universal PCI card supports 3.3 V/5 V PCI bus while the PIO-D168 supports 5 V PCI bus. These cards provide 168 TTL digital I/O lines, and these lines are grouped into eighteen 8-bit bi-direction ports. Every three ports on a connector are grouped and named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset.

The PIO-D168U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more PIO-D168U cards in one computer.

The PIO-D168/D168U supports various OS such as Linux, DOS, Windows 98/NT/2000 and 32-bit/64-bit Windows XP/2003/Vista/7. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.

PCI-M512U CR 0,00 €

Fri, 18 Oct 2019 13:31:38 +0200

The PCI-M512/PCI-M512U provides battery-backup 512 KB SRAM, 12-bit DI and 16-bit DO. In addition, the PCI-M512U supports both 5 V and 3.3 V PCI bus, while the PCI-M512 supports 5 V PCI bus only. The PCI-M512U (Universal PCI version) is designed as a drop-in replacement for the PCI-M512 (PCI version), so users can replace a PCI-M512 by a PCI-M512U directly without any software or driver modification.

Users can use the DB-16P to connect the input ports (CN2) for isolation purpose, or use DB-16R to interface to the output ports (CN1) for relay control.

The PCI-M512/PCI-M512U is equipped with two Li-batteries to maintain the content of the 512 KB SRAM when PC power loss occurs. The two Li-batteries can continue supplying power to the SRAM to retain the important data for 10 years. The two-battery design also makes it safe to replace new batteries without losing data; when one battery is taken out for replacing a new one, the other continues to provide power to the SRAM.

4 LED indicators on the board are provided for giving clear understanding of the battery states such as normal, low voltage or fault. The PCI-M512/PCI-M512U is an ideal solution for improving system reliability.

PISO-P32S32WU CR 0,00 €

Fri, 18 Oct 2019 13:31:36 +0200

PISO-P32S32WU has 32 channels of optical-isolated DI and 32 channels of optical-isolated open-collector output board (8-channel for 500 mA and 24-channel for 100 mA current sinking output, NPN), arranged into four isolated banks. Each input channel use a photo-coupler to isolate the card and computer from external signal. Each digital output offers a NPN transistor and integral suppression diode for inductive load. PISO-P32S32WU requires external power to drive the D/I and D/O ports and supports Card ID (jumper) features for multi-board identification and supports both 5 V and 3.3 V PCI slot.

This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. PISO-P32S32WU has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.

The PISO-P32S32WU supports various OS such as Linux, DOS, Windows 98, Windows 2000, Windows NT, Windows XP 32-Bit, Vista 32-Bit and Windows 7 32-Bit. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.

PCI-TMC12AU CR 0,00 €

Fri, 18 Oct 2019 13:30:30 +0200

The PCI-TMC12AU card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PCI-TMC12AU card is designed as a drop-in replacement for the PCI-TMC12A, and users can replace the PCI-TMC12A by the PCI-TMC12AU directly without software/driver modification.

The PCI-TMC12AU supports both 5 V and 3.3 V PCI bus, while the PCI-TMC12A supports 5 V PCI bus only. They feature twelve 16-bit timers/counters (four 82C54 chips x 3 timers/counters), 16 TTL digital input channels and 16 TTL digital output channels. The two onboard clocks (8 M/1.6 M and 0.8 M/80 K) are jumper selectable and provide a high-resolution clock source for timers/counters. Counters/timers can be used for industrial and laboratory applications such as pulse/event/switch-toggle counting, frequency readings, elapsed time measurement, pulse-width measurement, PWM (pulse-width-modulated) output, and pulse (square wave) and rate generation, etc.

The PCI-TMC12AU also adds a Card ID switch on board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PCI-TMC12AU cards in one computer.

These cards support a variety of operating systems, such as DOS, 32-/64-bit Windows XP/2003/2008/7/8 and Windows 10. ICP DAS also provides a DLL and Active X control for the PCI-TMC12A/TMC12AU, together with sample programs in various languages, including Turbo C++, Borland C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW, enabling help users to quickly and easily develop their custom applications.

PISO-P32C32U-5V CR 0,00 €

Fri, 18 Oct 2019 13:30:52 +0200

PISO-A64U CR 0,00 €

Fri, 18 Oct 2019 13:30:28 +0200

The PISO-A64U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PISO-A64U card is designed as a drop-in replacement for the PISO-A64, and users can replace the PISO-A64 by the PISO-A64U directly without software/driver modification.

The PISO-A64U universal PCI card supports 3.3 V/5 V PCI bus. The card provides 64 optically isolated digital output channels, each of which offers a PNP transistor and an integrated suppression diode for the inductive load. The isolated DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc. The board acts as an interface to field logic signals, eliminates ground-loop problems, and isolates the host computer from damaging voltages. The cards have a DB-37 connector and a 40-pin male header, each of which contains 32 output channels.

The PISO-A64U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more PISO-A64U cards in one computer.

These cards support a variety of operating systems, such as DOS, 32-/64-bit Windows XP/2003/2008/7/8 and Windows 10. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

PISO-C64U CR 0,00 €

Fri, 18 Oct 2019 13:31:00 +0200

The PEX-C64 and PISO-C64U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PEX-C64 and PISO-C64U card is designed as a drop-in replacement for the PISO-C64, and users can replace the PISO-C64 by the PEX-C64 and PISO-C64U directly without software/driver modification.

The PISO-C64U universal PCI card supports 3.3 V/5 V PCI bus while the PEX-C64 supports PCI Express bus. These cards provide 64 optically isolated digital output (DO) channels, each of which includes a darlington transistor that provides 3750 Vrms isolation, and an integrated suppression diode for inductive load. These DO channels are allocated into four isolated banks when using four isolated external power supplies. These DO channels act as an interface to field logic signals, eliminate ground-loop problems, and isolate the host computer from damaging voltages. These cards contains has a single DB-37 connector and a single 40-pin male header, each of which contains 32 output channels.

The PEX-C64 and PISO-C64U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PEX-C64 and PIO-C64U cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 8/7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.