I/O Module/8AI/100kHz/14-bit/JumperThe I-8017H is a 8 differential input Analog Input Module. This 8 differential input channels are provided with 14-bit of resolution and 90 kS/s sampling rate. Each channel can be confi gured to an individual input range of ±10 VDC, ±5 VDC, ±2.5 VDC, ±1.25 VDC or ±20 mA. The modules also provide ±4 kV ESD protection as well as 2500 VDC intra-module isolation. All the three modules can be used to measure voltage and current source. On the I-8017H, an external 125 Ω resistor is needed to measure current source.
I/O Module/8DO Relay/Form A/5A-250VACThe I-8064 module provides 8 Form A Relay Output channels, and is an ideal solution for highpower applications. The I-8064 includes 8 LED indicators that can be used to monitor the status of the Relay Output channels, 4 kV ESD protection and 500 VDC intra-module isolation are also provided to enhance the noise protection capabilities of the module in harsh industrial environments.
I/O Exp. Board/1 RS-232/5pin/0.6WThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X503 is a 1-Port Non-Isolation 5-wire RS-232 X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
I/O Exp. Board/7 PhotoMosThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X109 is a 7-channel PhotoMos relay output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
I/O Exp. Board /VPD/4 AI/4DI/4 RelayThe XV306 is a multifunction expansion board that includes 4 Analog Input channels, 4 Digital Input channels and 4 Form A Relay Output channels. It provides a programmable input range on all Analog Input channels (+/-1 V, +/-2.5 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ +20 mA or +4 ~ +20 mA), and voltage and current outputs are jumper selectable. The Digital Input channels can be used as 32-bit counters. The XV306 also provides options for configuring power-on values for the Digital Output. 4 kV ESD protection and 2000 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.
I/O Module/8DI/isolatedThe I-8052W module offers 8 fully independent differential Digital Input channels that feature 2 kV channel-to-channel Photocouple isolation. In addition, either sink- or source-type input can be selected via the wire connections. The I-8052W also includes 8 LED indicators that can be used to monitor the status of the Digital Input channels.
I/O Exp. Board/1AI/1AO/4DI/6DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X303 is a 1-channel Non-Isolation Analog Input and 1-channel Non-Isolation Analog Output and 4-channel Non-Isolation Digital Input and 6-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
I/O Exp. Board/2AI/2AO/3DI/3DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X310 is a 2-channel Non-Isolation Analog Input and 1-channel Non-Isolation Analog Output and 3-channel Non-Isolation Digital Input and 3-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
Accelerometer Data Logger/2AI/2DI/1Relay/LANThe AR-200/AR-400 series is a range of high-performance dynamic signal acquisition modules that are designed specifically for vibration monitoring and analysis. The maximum simultaneous sampling rate for each channel on the AR-200 and AR-400 is up to 200k-Hz and 125k-Hz respectively. The AR-200/AR-400 modules include a built-in 3mA excitation current to power the Integrated Electronics Piezo-Electric (IEPE) accelerometers and a 16-bit A/D converter. The data acquired by the AR-200/AR-400 is saved on a Micro SD card that can be used for offline vibration analysis. ICP DAS also provides a utility that can be installed on the Host PC that can be easily configured for different triggering modes, as well as changing the sampling rate, and scheduling the sampling time for various applications using the development tools. Consequently, the AR-200/AR-400 modules are recommended as your best choice for vibration monitoring and measurement.
I/O Exp. Board/1 RS-422/485/4DI/4DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X507 is a 1-Port Non-Isolation RS-422/485 and 4-channel Non-Isolation Digital Input and 4-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
I/O Module/16DO/isolatedThe I-8057W module offers 16 Digital Output channels, each of which features Photocouple isolation and supports sink-type output using an Open Collector. The I-8057W includes 16 LED indicators that can be used to monitor the status of the Digital Output channels. 4 kV ESD protection and 3750 VDC intra-module isolation is provided as standard.
I/O Exp. Board/7DI/7DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X119 is a 7-channel Non-Isolation Digital Input and 7-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series. (Without Case)
I/O Exp. Board/8DI or 8DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X104 is a 8-channel Non-Isolation Digital Input or 8-channel Non-Isolation Digital Output X-board for I-7188XC.
I/O Exp. Board/VPD/16DI/isolatedThe XV110 provides 16 channels for digital input, catering for both dry and wet contact, with an effective distance for dry contact of up to 500 meters. All channels feature photocouple isolation, and can be used as 32-bit counters. In addition, either sink- or source-type digital input can be selected via wire connections. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.
I/O Exp. Board/3AI/1AO/4DI/4DOThe X-board series are for I-7188XA, I-7188XB, I-7188XC, I-7188XG, I-7188EG, I-7188EX and uPAC-7186EX Series (uPAC-7186EX, uPAC-7186PEX, uPAC-7186EG, uPAC-7186EX-FD, uPAC-7186EX-SM).Above one µPAC can plug only one X-board.X304 is a 3-channel Non-Isolation Analog Input and 1-channel Non-Isolation Analog Output and 4-channel Non-Isolation Digital Input and 4-channel Non-Isolation Digital Output X-board for I-7188XB, I-7188XG, I-7188EX, I-7188EG and uPAC-7186EX Series.
€82.00*
Easy ordering via online shop
Directly from manufacturer
Europe-wide shipping
personal consultation
Request sent successfully
Request wasn't send - a error occured. Please try again.