" By using this website you agree that we use cookies. You can find more information in our Privacy Policy.
×
  • I-7565-G CR
  • I-7565-G CR
  • I-7565-G CR
  • I-7565-G CR

I-7565-G CR

Converter/USB to CAN

  • RoHs Design
  • Fully compliant with USB 1.1/2.0(Full Speed)
  • Fully compatible with the ISO 11898-2 standard
  • No external power supply is required as I-7565 takes it's power from the USB bus
  • 82C250 CAN transceiver
  • Transmission speed up to 1M bps for CAN and 921.6K bps for USB
  • Support both CAN 2.0A and CAN 2.0B
  • Built-in jumper to select 120 ohm terminal resister
  • Power, data flow and error indicator for CAN and USB
  • 1000 frames in CAN received buffer
  • Watchdog inside
  • Windows 98/ME/2000/XP/Linux drivers support
  • Linux driver supported‥
  • Support of OPC serve
  • Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565.
Customs number:
84718000
Delivery time:
2-3 weeks

CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface. Nowadays the interface is present in every new PC and is supported by the MS-Windows 98, Me, 2000 and XP operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).

The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface. 3000V isolation on CAN side

The CAN port of I-7565 is an isolated with 3000V isolation. This isolation can protect the local devices from the damage signal coming from CAN network.
Watchdog inside
The I-7565 Watchdog is a hardware reset circuit to monitor the I-7565’s operation status. When working in harsh or noisy environment, the I-7565 may be down by the external signal. The circuit may let the I-7565 to work continuously and never halt.
Power and Error indicator display
There are two indicators on the I-7565.The power indicator can help user to check whether the I-7565 is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565.