" By using this website you agree that we use cookies. You can find more information in our Privacy Policy.
  • I-7242D-G CR
  • I-7242D-G CR

I-7242D-G CR

Gateway/DeviceNet Slave/ModbusRTU Master/LED

  • DeviceNet Features
  • Group two only server DeviceNet subscriber
  • Dynamic Assembly Objects Mapping
  • On-line change baud rate and MAC ID of CAN
  • NS, MS and IO LED indicators
  • 7-segmemt LED to show operation mode, MAC ID, baud rate and error code
  • Connection supported:
  • "Explicit Connection"
  • "Polled Command/Response" connection
  • Bit-Strobed Command/Response" connection
  • "Cnange-of-State / Cyclic" connection
  • Configuration facilitated by the use of specific EDS files
  • Dedicated Explicit message interface for full Modbus interface
  • Explicit & I/O length: 240 bytes max.
  • Modbus RTU Features
  • Maximum number of subscribers: 10 Modbus commands
  • Communication speed: 1200,2400,4800,9600,19200,38400,57600 or 115200 bits/s, configured using  Utility
  • Data bits: 8 bits, configured using Utility
  • Parity bits: None, even or odd, configured using Utility
  • Stop bits: 1 or 2 bits, configured using Utility
Customs number:
Delivery time:
2-3 weeks

The I-7242D allows a master located on a DeviceNet network to enter into a dialogue with the slaves on a Modbus RTU network. It's a "Group 2 Only Slave" device in the DeviceNet network, and supports "Predefined Master/Slave Connection Set". From the view of the Modbus network, it is a Modbus RTU master which polls all the predefined data of the Modbus RTU slaves and bypasses the DeviceNet control commands to the Modbus slaves. This device is widely used in the application of building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. The I-7242D also has the utility tool which is used to configure the I-7242D's parameters and build the EDS file. Through the EDS file to the I-7242D, it is easy to apply the Modbus RTU devices in DeviceNet applications.