" Mit der Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass wir Cookies verwenden. Mehr Informationen finden Sie in unserer Datenschutzerklärung.
×
  • I-8410 CR

I-8410 CR

Controller/Intel 80188/DCON/4slots/256KB

  • Supports the RS-232 or RS-485 communication interface
  • Supports DCON communication protocol
  • Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules
  • Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
  • I/O configurable using DCON Utility
  • Firmware updated via the RS-232 port
  • Firmware auto scan AI modules and can map alarm to DO modules on the slots
  • Dual Watch Dog mechanism enable I-8000 system can work reliablely under harsh environment
  • Ventilated housing designed to operate between –25°C to +75°C
  • Using DIN rail clips or Screw poles around the corners allows the control unit to be easily mounted on the control box
  • Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD) capability and ensures that the module is more reliable
  • Various SDKs provided ( free )
  • DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc
Zollnummer:
84718000
Lieferzeit:
2-3 Wochen

The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.

The CPU is a 8-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. The I/O modules can be easily added to the I-8410/I-8810 and can be quickly integrated into an existing system.