- Wireless I/O Module 4 Digital Input & 4 Relay Output.
- Digital Input: wet contact, sink/source, 16-bit counter
- Relay output: max 5A @ 30VDC/250VAC
- Compliant 2.4GHz IEEE802.15.4 / ZigBee 2003 and ZigBee Pro (2007).
- Wireless transmission range up to 700 m (when no physical interaction).
- Configuration by rotary and DIP switch.
- Power supply: 10 to 30 VDC.
- I/O Pair functionality - ZT Coordinator (ZT-2550/2570) not mandatory
- DIN-Rail mounting
ZT-2060-IOP is a wireless remote I/O complying Zigbee and Zigbee PRO (2007) standard for maximal wireless transmission range of 700 meters. ZT-2060-IOP provides 4 Digital Input (wet contact, sink/source) and 4 relay output. Each relay output can drive up to 5A at 30 VDC or 250 VAC.
One very interesting feature of ZT-2060-IOP is the embedded I/O channel pairing function: this means that there is no need to use an external controller (PC/PLC). Each channel can be mirrored on a remote ZT-2060 unit.
Hence, ZT-2060-IOP continually tranmits wireless the DI values to the DO channels of a remote ZT-2060. On the same way, ZT-2060-IOP also reads the status of the DI channel of a remote ZT-2060, and synchronize them on its own DO channels.
No modem as ZT-2550 or ZT-2570 is required. ZT-2060-IOP configuration (Node Adress, protocol selection, Checksum, Module ID, RF-channel and I/O pairing) is achieved by rotary and DIP switches.
ZT-2060-IOP is fully RoHS-compliant and provides 4 kV ESD protection as well as 3750 VDC intra-module isolation.
Important: ZT-2060-IOP cannot be used in combination with the ZB-2000 series
|Wireless Interface||ZT-2060-IOP CR|
|Transmission Range||700 m|
|Transmission Power||11 dBm|
|Antenna||5 dBi Omni directional|
|Wireless Standard||ZigBee 2007 Pro|
|Network Topology||Star - Mesh - Cluster Tree|
|Protocol||DCON, Modbus RTU|
|Module Type||ZigBee Coordinator|
|Digital Input||ZT-2060-IOP CR|
|Signal Type||Isolated, Wet Contact (Sink/Source)|
|On Voltage Level||+3.5 VDC ~ +30 VDC|
|Off Voltage Level||+1 VDC Max.|
|Digital Output||ZT-2060-IOP CR|
|Relay Output||ZT-2060-IOP CR|
|Relay Type||Form A|
|Contact Rating||5 A @ (250 VAC/30 VDC)|
|Release Time||5 ms max. at Rated Voltage|
|Operate Time||10 ms max. at Rated Voltage|
|Dimensions (WxLxH)||33 mm x 94 mm x 110 mm|
|Voltage Supply||10-30 VDC|
|Operating Temperature||-25 to 75°C|
|Housing||Plastic with UL94-V0|
This product has been included in our catalog during the past last 3 months. It can be purchased immediately.
Wireless I/O/6 DI / 4 Relay / Zigbee / Pairing